Safekipedia

High-lift device

Adventurer · ages 7–10Adapted from Wikipedia
An Air New Zealand Boeing 747-400 arriving at London Heathrow Airport in 2010, with its wing flaps and landing gear visible as it comes in to land.

In aircraft design and aerospace engineering, a high-lift device is a part or mechanism on an aircraft's wing that helps the wing make more lift. Lift is the force that keeps an aircraft in the air.

High lift devices on an Air New Zealand Boeing 747-400 (ZK-SUH) on arrival to London Heathrow, England. The triple-slotted trailing edge flaps are well displayed and the Krueger flaps on the leading edge also are visible.

Some high-lift devices are fixed parts of the wing. Others can move, and they are only used when they are needed. The most common movable devices are wing flaps and slats.

Fixed high-lift devices include leading-edge slots, leading edge root extensions, and boundary layer control systems.

Purpose

A wing has to balance different needs. A larger wing gives more lift, which helps a plane take off and land at lower speeds and in shorter distances. However, a large wing also creates more drag, which slows the plane down during the long middle part of a flight. Modern passenger jets are designed to be fast and efficient while cruising, because they spend most of their flight time doing that.

High-lift devices solve this problem. They add lift only when it is needed, during takeoff and landing. This makes landing safer and shorter. It also lets the plane use a more efficient wing for the rest of the flight. For example, the high-lift devices on the Boeing 747-400 increase the wing area by 21% and increase the lift generated by 90%.

Types of device

Main article: Flap (aircraft)

Main articles: Leading-edge slat and Leading-edge slot

Main article: Leading edge extension

The most common high-lift device is the flap. A flap is a movable part of the wing that can be lowered to create extra lift. When it is lowered, it changes the wing's shape to give it more camber. Flaps are usually found on the back edge of a wing, though some are on the front edge, and there are many kinds. Simple hinged flaps became common in the 1930s, when faster planes with higher landing and takeoff speeds were built. Travelling flaps slide backwards to increase the wing chord and wing area. They began to appear just before World War II. Slotted flaps are made of several small parts that separate and slide past each other. Large modern airliners use triple-slotted flaps to get the strong lift needed for takeoff.

Another common device is the slat. A slat is a small, wing-shaped part attached in front of the wing's leading edge. It guides air smoothly over the top of the wing at a high angle of attack. This lets the wing work at the higher angles needed for more lift. The gap between a slat and the wing is called a slot. Gustav Lachmann developed the first slats in 1918. Handley-Page also worked on them at the same time and received a patent in 1919. By the 1930s, automatic slats that opened and closed as needed had been developed.

Some devices use air from the engine to help shape the airflow over the wing. Blown flaps take "bleed air" from a jet engine's compressor or exhaust. They blow this air over the top of the wing and flap, which helps the air stick to the wing at higher angles. A more advanced version is the circulation control wing. It blows air backwards over a specially designed airfoil to create lift through the Coandă effect. The Blackburn Buccaneer used a similar system to reduce its stalling speed, so it could operate from smaller aircraft carriers. Some planes, such as the C-17 Globemaster III, place flaps directly in the path of the engine exhaust.

More common on modern fighter aircraft is the leading-edge root extension (LERX). This is a small triangular piece that joins the wing's front edge to the plane's body. At high angles, it creates a vortex that lies on top of the main wing and adds lift. The Co-Flow Jet (CFJ) wing uses an injection slot and a suction slot to add lift, increase the stall margin, and reduce drag. CFJ is promoted by the mechanical and aerospace engineering department of the University of Miami. For a hybrid-electric regional aircraft based on the ATR 72 with the same wing size and weight, CFJ can improve its lift coefficient at a higher wing loading. This allows more room for fuel and batteries, which means a longer range.

Quiz time!

4 questions about High-lift device

Question 1 of 4

What does lift do for an aircraft?

Keep exploring

This article is a child-friendly adaptation of the Wikipedia article on High-lift device, available under CC BY-SA 4.0.

Images from Wikimedia Commons. Tap any image to view credits and license.