Safekipedia

Convair X-6

Discoverer · ages 10+Adapted from Wikipedia
The NB-36H, a specially modified B-36 bomber, leaves trails of contrails high in the sky as it flies.

The Convair X-6 was an experimental aircraft project that aimed to develop and test a nuclear-powered jet aircraft. Engineers carried out experiments on a testbed aircraft called the Convair NB-36H, which was based on the B-36 bomber.

The program was canceled before the real X-6 and its nuclear reactor engines were finished. The X-6 was part of a larger set of programs that ran from 1946 through 1961 and cost 7 billion USD.

The main idea was that nuclear-powered strategic bombers could stay in the air for weeks at a time. Their range would not be limited by liquid jet fuel.

Development and design

In May 1946, the NEPA project was started by the United States Army Air Forces to study nuclear power for aircraft. In May 1951, it was replaced by the Aircraft Nuclear Propulsion (ANP) program, which planned for Convair to change two B-36 bombers. One was used to study shielding for an airborne reactor, and the other became the X-6. The first changed plane was a B-36H that had been damaged in a tornado at Carswell AFB in September 1952. It was renamed the NB-36H and fitted with a 1 megawatt, air-cooled nuclear reactor in its bomb bay. The reactor worked but did not power the plane. Its only purpose was to study how radiation affects aircraft systems. The crew was protected by lead and rubber shielding in the nose and a thick acrylic windshield. Between September 1955 and March 1957, the plane completed 47 test flights over New Mexico and Texas. The NB-36H was scrapped at Fort Worth in 1958 when the Nuclear Aircraft Program was abandoned. The X-6 project was abandoned in 1961.

Experimental Breeder Reactor I in Idaho, the first power reactor, now a museum. The reactor is in the building top right, the two structures lower left are reactors from the Aircraft Nuclear Propulsion Project

Had the program continued, follow-on aircraft would have been based on the successor to the B-36, Convair's swept-wing B-60. The X-6 would have used General Electric X-40 engines, which were modified J53 engines that used nuclear energy as fuel. In this design, the reactor core would heat the air that turned the turbine, instead of jet fuel being burned. One disadvantage was that air had to keep flowing through the engine to cool the reactor, even after the aircraft had landed and parked. GE built two prototype engines, which can be seen outside the Experimental Breeder Reactor I in Arco, Idaho. A large hangar, 350 feet (110 m) wide, was built at Test Area North, part of the National Reactor Testing Station (now part of the Idaho National Laboratory; Monteview). The project was canceled before the planned 15,000-foot (4,600 m) runway was built.

Specifications

The aircraft had a crew of five. It was 162 feet (49.38 m) long, with a wingspan of 230 feet (70.1 m) and a height of 46 feet 9 inches (14.26 m). Its wing area was 4,770 square feet (443.3 m2), and its maximum takeoff weight was 360,000 pounds (163,000 kg).

It had four General Electric J53 nuclear turbojets, each producing 5,200 lbf (23 kN) of thrust, and six Pratt & Whitney R-4360-53 engines, each producing 3,800 horsepower (2,830 kW). Its top speed was 390 mph (628 km/h), and its service ceiling was 40,000 feet (12,200 m).

Quiz time!

5 questions about Convair X-6

Question 1 of 5

What was the big idea behind nuclear-powered bombers?

Keep exploring

This article is a child-friendly adaptation of the Wikipedia article on Convair X-6, available under CC BY-SA 4.0.

Images from Wikimedia Commons. Tap any image to view credits and license.