Safekipedia

AM broadcasting

Adventurer · ages 7–10Adapted from Wikipedia
An animated diagram comparing amplitude modulation (AM, red) and frequency modulation (FM, blue) of a radio wave. The top graph shows the original signal, such as a sound from a microphone.

AM broadcasting is radio broadcasting that uses amplitude modulation (AM) signals. It was the first method developed for sending sound over radio, and it is still used around the world. It is mainly found on the medium wave band (also called the "AM band"), but it is also used on the longwave and shortwave radio bands.

The first experimental AM broadcasts began in the early 1900s. Regular AM broadcasting did not become common until the 1920s, after vacuum tube radios were developed. AM radio was the main way to broadcast for the next 30 years. This time is often called the "Golden Age of Radio". Then television broadcasting became popular in the 1950s and took over many of the shows that radio had carried.

Later, fewer people listened to AM radio. It had to compete with FM radio, digital radio, satellite radio, Internet radio, music streaming services, and podcasting.

Main radio bands

AM broadcasts cost more to send than FM or digital transmissions. They need a strong carrier wave to travel well, and they need large antennas because their frequencies are low. At night, AM signals can travel very far through the ionosphere. However, they are more easily disturbed by interference and often sound less clear. Because of this, AM stations often focus on spoken shows, such as talk radio, all-news radio and sports radio. Music is mostly played on FM and digital stations.

For the song by Everclear, see AM Radio (song). For the American musical group, see AM Radio (band).

History

For more coverage of this topic, see History of radio and History of broadcasting.

See also: FM broadcasting § History

One of the earliest radio broadcasts, French soprano Mariette Mazarin singing into Lee de Forest's arc transmitter in New York City on February 24, 1910.

Early radio could only send Morse code dots and dashes. Sending sound was a big step forward. Canadian-born inventor Reginald Fessenden is generally seen as the main early developer of AM technology. In 1900, he sent speech about one mile, but the sound was too distorted to be useful. Later, vacuum tubes made it possible to boost signals and create clearer AM sound. This led to more radio stations. Test broadcasts of music and news began in the 1900s and 1910s. Regular broadcasting grew after World War I.

Radio networks connected stations together with telephone lines so that programs could reach listeners across a whole country. In the United Kingdom, the British Broadcasting Company was formed in 1922. From the early 1920s through the 1940s, AM radio was the main source of home entertainment. Then television took its place. In the 1940s, FM radio and television began to compete strongly with AM. AM stations changed their programs to keep listeners. AM stereo was developed in the late 1970s, but it did not become widely used. In 2022, it was reported that AM radio was being removed from some electric vehicle models.

Lee de Forest used an early vacuum-tube transmitter to broadcast returns for the Hughes-Wilson presidential election returns on November 7, 1916, over 2XG in New York City. Pictured is engineer Charles Logwood.
Nellie Melba making a broadcast over the Marconi Chelmsford Works radio station in England on June 15, 1920.
Farmer listening to U.S. government weather and crop reports using a crystal radio in 1923. Public service government time, weather, and farm broadcasts were the first radio "broadcasts".

Main article: Radio network

Main article: Golden Age of Radio

AM band revitalization efforts in the United States

See also: Fairness Doctrine § Revocation

Main articles: AM stereo § Adoption in the United States, and AMAX

Radios meeting the AMAX standards could display a certification logo, with the "stereo" notation reserved for those capable of AM stereo reception

Main article: AM expanded band § United States

Main article: HD Radio

Main article: Broadcast relay station § United States

After the FM band was set up in 1941, some people thought the AM band would soon go away. FM grew slowly, and it was not until 1978 that more people listened to FM than AM. In 1987, the Fairness Doctrine rule was removed. After that, talk shows on AM stations could focus on controversial topics. Nationwide shows, such as those of Rush Limbaugh starting in 1988, were sometimes said to have "saved" AM radio. Even so, the number of AM listeners kept going down. In 1961, the Federal Communications Commission (FCC) chose one standard for FM stereo. Efforts to bring stereo to AM ran into problems. In 1993, the FCC chose C-QUAM as the one AM stereo system and approved AMAX standards, but these efforts did not make much difference.

In 1988, an international meeting approved changes that added new frequencies to the AM band. The International Telecommunication Union (ITU) helped make this happen. Only a small number of stations moved to the new frequencies. In 2002, the FCC approved HD Radio for AM stations. It sends both a regular signal and a digital signal. In 2020, the FCC allowed AM stations to switch to all-digital broadcasting. In 2009, the FCC let AM stations broadcast through FM translator stations. By 2020, many AM stations were doing this. In 2018, the FCC proposed reducing protection for some powerful AM stations. The Federal Emergency Management Agency (FEMA) worried this would make emergency communications weaker. In 2023, lawmakers proposed a law to stop car companies from removing AM radio from cars. They said AM is important for the Emergency Alert System (EAS).

Other digital standards

DRM30 is another standard for broadcasting on the AM bands. It is used in India and China, among other countries.

Main article: Carrier current

See also: Low-power broadcasting

AM radio waves technology is simpler than later systems. An AM receiver notices changes in the signal's strength at a set frequency. It then turns those changes into sound through a loudspeaker or earphone. This simplicity also makes AM open to "static." Static is caused by radio noise and radio frequency interference from lightning and electrical devices, such as fluorescent lights, motors, and car ignition systems. In big cities, metal structures and tall buildings can badly disrupt AM signals. For this reason, AM radio tends to work best where FM frequencies are in short supply, or where the land has few people or many mountains. Stations on the same frequency must be kept far apart. An AM signal must be about 20 times stronger than an interfering one to keep its quality. With FM, the "capture effect" means the stronger signal needs to be only about twice as strong.

To make room for more stations on the mediumwave band, the FCC adopted a National Radio Systems Committee (NRSC) standard in June 1989. It limited the highest transmitted audio bandwidth to 10.2 kHz. This cut the space each station uses to 20.4 kHz. The earlier audio limit of 15 kHz had given a bandwidth of 30 kHz. The design of receivers also limits AM sound quality. Efforts such as the AMAX standards in the United States have tried to improve it. AM stations use several bands. These bands are governed by the ITU's Radio Regulations and by each country's telecommunications administration. The longwave band was where most early broadcasting experiments took place. However, complaints about interference, especially from the military, led most broadcasting to move to higher frequencies. Medium wave is by far the most commonly used AM band. Shortwave is used to reach listeners far away, but its long range comes with lower audio fidelity. Starting in the mid-1930s, a very low power method called carrier current was developed. It began with "The Brown Network" at Brown University, and it was mostly adopted on U.S. college campuses. Newer hybrid systems, such as HD Radio and Digital Radio Mondiale, add digital signals to AM transmissions to improve sound quality.

Quiz time!

4 questions about AM broadcasting

Question 1 of 4

What is the time when AM radio was the main way to broadcast often called?

Pictures

A live radio play being broadcast at an NBC studio in New York, with a sound effects artist creating sounds like footsteps and doors.
A family in the 1920s listens to a crystal radio through earphones. Crystal sets ran on the power of radio waves alone, so the family members had to share headphones instead of using a loudspeaker.
A Zenith Model 12S-568 console radio from around 1941, with its unusual 'robot' shutter dial. Radios like this one used glowing vacuum tubes to receive broadcasts.
A man in 1923 listening to a subscription radio receiver provided by the German Post Office. Radio broadcasting in Germany began in 1922 as a paid service, and each household rented one of these receivers for a monthly fee.
This 1922 license allowed people in Britain to use a radio receiver for a year. It cost ten shillings, and part of that fee helped pay for the BBC programs listeners enjoyed.
A 1925 cartoon from a radio magazine about who controls music played on the radio. Back then, sheet music publishers, who owned the rights to most songs, sometimes blocked performers from using the microphone, which upset many listeners.
The logo of WCHL, a radio station, as it looked in 2017.
A 1912 newspaper article from the San Diego Union describing an early musical concert broadcast by wireless telephone.

Keep exploring

This article is a child-friendly adaptation of the Wikipedia article on AM broadcasting, available under CC BY-SA 4.0.

Images from Wikimedia Commons. Tap any image to view credits and license.